Our daily life has been inseparable from electronic products, so people have higher and higher requirements for electronic products, the production of electronic products should be in the clean room, to ensure the smooth development of production and manufacturing. But the electronic clean room purification project is also likely to be due to a ventilation duct is not suitable, or staff walking and not up to the estimated actual effect, harm the quality of goods. So, what key elements are related to the construction of the clean room purification project of the electronics factory? Let's find out more about it.

1. Clean room system software of electronics factory

The software of the air filtration system in the clean room of the electronics factory can be divided into horizontal layers. There are about three kinds of flow, vertical layer, flow and vortex. The way of selecting cyclone should be selected by referring to the design scheme of purification workshop engineering, reasonable layout and regulations, and other major parameters.

2. Cleanliness level and air change of clean room of electronics factory

The cleanliness level of each place in the clean room of the electronics factory is the frequency of ventilation within a certain time, so carefully consider the working standards of each room in the clean room are very likely to be different, and the provisions of the production process, and then the performance parameters of the purification equipment.

3. Structure of clean room of electronics factory

In order to better ensure that the cyclone is almost not affected, it is necessary to carry out the overall design of the clean room, and the key reasonable layout of the clean room of the electronics factory, to avoid the cause of the cyclone vortex in the clean room, necessary caution can reasonably avoid some redundant things.

4. Design of clean room of electronics factory

To clarify the program design, it is necessary to carefully consider the working content of the house and the cyclone standard in which it is carried out, master the overall reasonable layout and regulations, the production workshop with large amount of dust to reduce the road exhaust as far as possible, and the room with higher cleanliness grade should try to eliminate other production workshops.

5. Raw materials selected for the clean room of the electronics factory

The raw materials of the roof, wall and wood floor of the clean room of the electronics factory must not be dust, corrosion resistance, heat resistance, not easy to crack, not easy to cause electrostatic induction. In addition, according to the standards of different rooms, materials should also be selected according to the specific situation.

6. Working pressure and cyclone in clean room of electronics factory

In order to better ensure the cleanliness level of the electronics factory clean room purification project, the sealing of the purification workshop must be better, so as to avoid the outside environment pollution cyclone into the production workshop, to achieve this goal also stipulates that a certain positive pressure must be maintained in the purification workshop. In order to better get the prescribed working pressure, it is necessary to fill a moderate amount of fresh air.

7. Auxiliary equipment for clean room of electronics factory

In order to ensure the cleanliness level of the electronics factory clean room, some auxiliary equipment should also be applied: such as the stainless steel air shower of the clean room channel of the electronics factory, the stainless steel transfer window of the object transmission application, etc. This equipment must be suitable for the cleaning requirements of clean room purification engineering, so that it can fully ensure that it is not easy to harm the clean room in the case of application and give full play to its effect.

8. Control of people and things in the clean room of electronics factory

People and objects are the key source of dust in the clean room of electronics factory. Natural production line equipment will also dust, but people and objects are the biggest source of dust. Therefore, there must be sufficient control, such as: before entering the electronics factory clean room, all people must go through changing clothes, cleaning the shower system software, and to limit the total number of workers. Objects in the case of transmission must be cleaned before transmission, and the transmission must be carried out in a proper manner.

Electronics factory clean room generally uses color steel tile structure, the window is flush with the wall of the two-layer window, because this kind of two-layer window sealing is good, can reasonably reduce the cooling capacity outflow; PVC flooring, epoxy resin colored sand floor, epoxy resin glue leveling, epoxy curing agent, etc.