WhatsApp:+86-13921537301 , Email:sale@hurricanetechs.com

Corporate News

Your position:HOME > NEWS > Procedure for proper use of laboratory clean workbench

Procedure for proper use of laboratory clean workbench

Popularity:5 Release time:2022-11-07 15:50:01

First turn on the power. Insert the power into the socket and open the main switch of the whole clean workbench, you can see a power indicator light on the button panel, indicating that the power is switched on. (Usually, the main power switch of the laboratory clean table is always in the open state).

Procedure for proper use of laboratory clean workbench

Generally, it is necessary to turn on the fan 15 to 20 minutes in advance before work to make the clean area clean, and turn on the ultraviolet sterilization lamp for sterilization and disinfection at the same time; Ultraviolet light can be disinfected because of its short wavelength, high frequency, high photon energy for disinfection; Remember, please do not turn on the ultraviolet sterilization lamp when the staff is working, otherwise it will burn the eyes and skin of the staff.


End the test, clean the super clean table top, turn off the fan, pull down the dustproof glass baffle. After the test, wipe the table with alcohol cotton ball after cleaning the waste. Pull down the dustproof glass baffle after shutting down the fan. If there is a test below, you can turn on the UV lamp, ready for the next use.


no cache
Processed in 1.393812 Second.