WhatsApp:+86-13921537301 , Email:sale@hurricanetechs.com

Corporate News

Your position:HOME > NEWS > How to deal with the failure of the air shower

How to deal with the failure of the air shower

Popularity:14 Release time:2022-10-25 09:09:01

Definition of air shower room: also known as air shower room, it is a kind of local purification equipment with strong versatility, in which people or goods enter the clean area and are blown out of the air shower nozzle by the wind with high efficiency filtration and clean strong wind to remove the dust adsorbed on the surface of people or objects. So when the air shower room failure, how to deal with it?

How to deal with the failure of the air shower

The power switch is faulty. Usually there are four places to cut off the power supply in the air shower room: 1. The power switch of the outdoor box of the air shower; 2, the control panel of the cabinet of the air shower room; 3, the air shower on both sides of the outer box (where the power switch can prevent the emergency to cut off the power supply, effectively improve the personal safety of staff). When the power indicator light is not blocked, do not re-check the above four air shower power supply.

The fan in the air shower is not working when the fault occurs. When the air shower does not work, the first time to check whether the emergency switch of the box body outside the air shower is cut off, such as to determine the cut off, gently press with your hand, and rotate to the right to let go.

Wind shower fan inverted or wind shower wind speed is very small fault, please be sure to check whether the 380V three-phase four lines of the line is reversed, general air shower manufacturers factory installation will have a special electrician connected line; Such as the reverse connection of the air shower room line source, light will lead to the wind shower room fan does not work or reverse wind shower room wind speed decreases, heavy will burn the whole air shower circuit board; It is recommended that the air shower enterprises do not lightly replace the wiring, because the production needs to be sure to move, please consult the air shower manufacturers to solve.

The air shower room does not blow, in addition to the above three points, but also need to check whether the emergency stop key inside the air shower chamber is pressed, such as the emergency stop key for the color, the air shower room will not blow; Press the emergency stop button again and it will work normally.

The air shower room cannot automatically induction blowing fault, please check the light sensing system in the lower right corner of the cabinet of the air shower room, to see whether the light sensing device is installed correctly, if the light sensing two sides are opposite and the light sensing is normal, it can automatically induction blowing.

When the air shower room is used for a period of time, the wind speed is very low, please check whether the initial and high efficiency filter of the air shower room is too much dust, if so, please replace the filter. (The initial effect filter of the air shower chamber is generally replaced once within 1-6 months, and the high efficiency filter of the air shower chamber is generally replaced once within 6-12 months).


修改翻译结果


no cache
Processed in 1.475260 Second.