+86-510-83599928

Corporate News

Your position:HOME > NEWS > Some mechanical equipment problems in the construction of purification workshop

Some mechanical equipment problems in the construction of purification workshop

Popularity:15 Release time:2021-07-21

Now based on the theories of erosion science basic theory and purification workshop, integration test and production in the scientific research of the specific situation, and analyzes its reason, and obtain some perfect information content data information, master to this way of problem solving, this, according to the theory of production and manufacturing machinery and equipment maintenance has certain necessity, In order to ensure that all the normal operation of the purification workshop, such as opening and closing the gate valve, the cyclone can carry out a reasonable circulation of goods, and so that the internal cleaning is not affected, in order to reduce the impact of air pollution.

Some mechanical equipment problems in the construction of purification workshop

Therefore must maintain positive pressure purification workshop, be sure to choose moderate pressure value, if small purification workshop, the positive pressure can damage immediately, harm of internal cleanliness, if a large air purification system is the system software will enhance dustiness, central air conditioning load will improve filtration unit will decrease and therefore not economic development, And when the positive pressure value is higher than 50Pa, it is very difficult to open the door of the purification workshop.


At the present stage of the relevant specifications of countries in the world, formulated the standard of the positive pressure value of the purification workshop, the negative pressure difference between the purification workshop and the clean area must be greater than or equal to 5Pa, the negative pressure difference between the clean area and the outside must be greater than or equal to 0Pa, thus causing a lot of dust in the whole process of technology, Room and other production workshop or area must maintain relative air pressure, thus eventually part involves the characteristics of pharmaceutical technology, especially in the process of soot and other pests, perseverance and other industry relative air pressure, prevent chemical diversification of hazards and environmental pollution, Other areas are also a key component of work stress manipulation.


If in the purification workshop can maintain dustiness enough large displacement, can consider the positive pressure value of the production workshop, at this time in the middle of the inside and the outside world, under the negative pressure difference of the effect of, according to a gas leak casing is inseparable from the structure and channels of gas and the exit gas of mechanical equipment in the middle of the difference is not the same, problem is adjusted mechanical equipment inlet wind is always the same.


cache
Processed in 0.004852 Second.